pn_stp_port – CLI command to modify stp-port

New in version 2.8.

Synopsis

• This module can be used modify Spanning Tree Protocol (STP) parameters on ports.

Parameters

Parameter	Choices/Defaults	Comments
pn_block boolean	Choices: no yes	Specify if a STP port blocks BPDUs.
pn_bpdu_guard boolean	Choices: no yes	STP port BPDU guard.
pn_cliswitch string		Target switch to run the CLI on.
pn_cost string	Default: "2000"	STP port cost from 1 to 200000000.
pn_edge boolean	Choices: no yes	STP port is an edge port.
pn_filter boolean	Choices: no yes	STP port filters BPDUs.
pn_port string		STP port.
pn_priority string	Default: "128"	STP port priority from 0 to 240.
pn_root_guard boolean	Choices: no yes	STP port Root guard.
state string / required	Choices: update	State the action to perform. Use update to update stp-port.

Examples

- name: Modify stp port
  pn_stp_port:
    pn_cliswitch: "sw01"
    state: "update"
    pn_port: "1"
    pn_filter: True
    pn_priority: '144'

- name: Modify stp port
  pn_stp_port:
    pn_cliswitch: "sw01"
    state: "update"
    pn_port: "1"
    pn_cost: "200"

- name: Modify stp port
  pn_stp_port:
    pn_cliswitch: "sw01"
    state: "update"
    pn_port: "1"
    pn_edge: True
    pn_cost: "200"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
changed boolean	always	indicates whether the CLI caused changes on the target.
command string	always	the CLI command run on the target node.
stderr list	on error	set of error responses from the stp-port command.
stdout list	always	set of responses from the stp-port command.

Status

• This module is not guaranteed to have a backwards compatible interface. [preview]
• This module is maintained by the Ansible Community. [community]

Authors

• Pluribus Networks (@rajaspachipulusu17)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.