junos_vlan – Manage VLANs on Juniper JUNOS network devices¶

New in version 2.4.

DEPRECATED
Synopsis
Requirements
Parameters
Notes
Examples
Return Values
Status

DEPRECATED ¶

Removed in Ansible:
	version: 2.13
Why:	Updated modules released with more functionality
Alternative:	Use junos_vlans instead.

Synopsis ¶

This module provides declarative management of VLANs on Juniper JUNOS network devices.

Requirements ¶

The below requirements are needed on the host that executes this module.

ncclient (>=v0.5.2)

Parameters ¶

Parameter		Choices/Defaults	Comments
active boolean		Choices: no yes ←	Specifies whether or not the configuration is active or deactivated
aggregate -			List of VLANs definitions.
description -			Text description of VLANs.
filter_input - added in 2.8			The name of input filter.
filter_output - added in 2.8			The name of output filter.
interfaces -			List of interfaces to check the VLAN has been configured correctly.
l3_interface - added in 2.7			Name of logical layer 3 interface.
name - / required			Name of the VLAN.
provider dictionary			Deprecated Starting with Ansible 2.5 we recommend using `connection: network_cli` or `connection: netconf`. For more information please see the Junos OS Platform Options guide. A dict object containing connection details.
	host string / required		Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
	password string		Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_PASSWORD` will be used instead.
	port integer	Default: 22	Specifies the port to use when building the connection to the remote device. The port value will default to the well known SSH port of 22 (for `transport=cli`) or port 830 (for `transport=netconf`) device.
	ssh_keyfile path		Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_SSH_KEYFILE` will be used instead.
	timeout integer	Default: 10	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	username string		Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_USERNAME` will be used instead.
state -		Choices: present ← absent	State of the VLAN configuration.
vlan_id - / required			ID of the VLAN. Range 1-4094.

Notes ¶

Note

This module requires the netconf system service be enabled on the remote device being managed.
Tested against vSRX JUNOS version 15.1X49-D15.4, vqfx-10000 JUNOS Version 15.1X53-D60.4.
Recommended connection is netconf. See the Junos OS Platform Options.
This module also works with local connections for legacy playbooks.
For information on using CLI and netconf see the Junos OS Platform Options guide
For more information on using Ansible to manage network devices see the Ansible Network Guide
For more information on using Ansible to manage Juniper network devices see https://www.ansible.com/ansible-juniper.

Examples ¶

- name: configure VLAN ID and name
  junos_vlan:
    name: test
    vlan_id: 20

- name: Link to logical layer 3 interface
  junos_vlan:
    name: test
    vlan_id: 20
    l3-interface: vlan.20

- name: remove VLAN configuration
  junos_vlan:
    name: test
    state: absent

- name: deactive VLAN configuration
  junos_vlan:
    name: test
    state: present
    active: False

- name: activate VLAN configuration
  junos_vlan:
    name: test
    state: present
    active: True

- name: Create vlan configuration using aggregate
  junos_vlan:
    aggregate:
      - { vlan_id: 159, name: test_vlan_1, description: test vlan-1 }
      - { vlan_id: 160, name: test_vlan_2, description: test vlan-2 }

- name: Delete vlan configuration using aggregate
  junos_vlan:
    aggregate:
      - { vlan_id: 159, name: test_vlan_1 }
      - { vlan_id: 160, name: test_vlan_2 }
    state: absent

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
diff.prepared string	when configuration is changed and diff option is enabled.	Configuration difference before and after applying change. Sample: [edit vlans] + test-vlan-1 { + vlan-id 60; + }

Status ¶

This module will be removed in version 2.13. [deprecated]
For more information see DEPRECATED.

Authors¶

Ganesh Nalawade (@ganeshrn)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.