iosxr_facts – Get facts about iosxr devices

Synopsis

  • Collects facts from network devices running the iosxr operating system. This module places the facts gathered in the fact tree keyed by the respective resource name. The facts module will always collect a base set of facts from the device and can enable or disable collection of additional facts.

Parameters

Parameter Choices/Defaults Comments
gather_network_resources
-
added in 2.9
When supplied, this argument will restrict the facts collected to a given subset. Possible values for this argument include all and the resources like interfaces, lacp etc. Can specify a list of values to include a larger subset. Values can also be used with an initial ! to specify that a specific subset should not be collected. Valid subsets are 'all', 'lacp', 'lacp_interfaces', 'lldp_global', 'lldp_interfaces', 'interfaces', 'l2_interfaces', 'l3_interfaces', 'lag_interfaces'.
gather_subset
-
Default:
"!config"
When supplied, this argument will restrict the facts collected to a given subset. Possible values for this argument include all, hardware, config, and interfaces. Can specify a list of values to include a larger subset. Values can also be used with an initial ! to specify that a specific subset should not be collected.
provider
dictionary
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli.
For more information please see the Network Guide.
A dict object containing connection details.
host
string / required
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
password
string
Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
port
integer
Default:
22
Specifies the port to use when building the connection to the remote device.
ssh_keyfile
path
Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
timeout
integer
Default:
10
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
username
string
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.

Notes

Note

Examples

# Gather all facts
- iosxr_facts:
    gather_subset: all
    gather_network_resources: all

# Collect only the config and default facts
- iosxr_facts:
    gather_subset:
      - config

# Do not collect hardware facts
- iosxr_facts:
    gather_subset:
      - "!hardware"

# Collect only the lacp facts
- iosxr_facts:
    gather_subset:
      - "!all"
      - "!min"
    gather_network_resources:
      - lacp

# Do not collect lacp_interfaces facts
- iosxr_facts:
    gather_network_resources:
      - "!lacp_interfaces"

# Collect lacp and minimal default facts
- iosxr_facts:
    gather_subset: min
    gather_network_resources: lacp

# Collect only the interfaces facts
- iosxr_facts:
    gather_subset:
      - "!all"
      - "!min"
    gather_network_resources:
      - interfaces
      - l2_interfaces

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
ansible_net_all_ipv4_addresses
list
when interfaces is configured
All IPv4 addresses configured on the device
ansible_net_all_ipv6_addresses
list
when interfaces is configured
All IPv6 addresses configured on the device
ansible_net_api
string
always
The name of the transport
ansible_net_config
string
when config is configured
The current active config from the device
ansible_net_filesystems
list
when hardware is configured
All file system names available on the device
ansible_net_gather_network_resources
list
always
The list of fact resource subsets collected from the device
ansible_net_gather_subset
list
always
The list of fact subsets collected from the device
ansible_net_hostname
string
always
The configured hostname of the device
ansible_net_image
string
always
The image file the device is running
ansible_net_interfaces
dictionary
when interfaces is configured
A hash of all interfaces running on the system
ansible_net_memfree_mb
integer
when hardware is configured
The available free memory on the remote device in Mb
ansible_net_memtotal_mb
integer
when hardware is configured
The total memory on the remote device in Mb
ansible_net_model
string
always
The model name returned from the device
ansible_net_neighbors
dictionary
when interfaces is configured
The list of LLDP neighbors from the remote device
ansible_net_python_version
string
always
The Python version Ansible controller is using
ansible_net_version
string
always
The operating system version running on the remote device


Status

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

  • Ricardo Carrillo Cruz (@rcarrillocruz)
  • Nilashish Chakraborty (@Nilashishc)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.