ce_stp – Manages STP configuration on HUAWEI CloudEngine switches

New in version 2.4.

Synopsis

• Manages STP configurations on HUAWEI CloudEngine switches.

Parameters

Parameter	Choices/Defaults	Comments
bpdu_filter -	Choices: enable disable	Specify a port as a BPDU filter port.
bpdu_protection -	Choices: enable disable	Configure BPDU protection on an edge port. This function prevents network flapping caused by attack packets.
cost -		Set the path cost of the current port. The default instance is 0.
edged_port -	Choices: enable disable	Set the current port as an edge port.
interface -		Interface name. If the value is all, will apply configuration to all interfaces. if the value is a special name, only support input the full name.
loop_protection -	Choices: enable disable	Enable loop protection on the current port.
root_protection -	Choices: enable disable	Enable root protection on the current port.
state -	Choices: present ← absent	Specify desired state of the resource.
stp_converge -	Choices: fast normal	STP convergence mode. Fast means set STP aging mode to Fast. Normal means set STP aging mode to Normal.
stp_enable -	Choices: enable disable	Enable or disable STP on a switch.
stp_mode -	Choices: stp rstp mstp	Set an operation mode for the current MSTP process. The mode can be STP, RSTP, or MSTP.
tc_protection -	Choices: enable disable	Configure the TC BPDU protection function for an MSTP process.
tc_protection_interval -		Set the time the MSTP device takes to handle the maximum number of TC BPDUs and immediately refresh forwarding entries. The value is an integer ranging from 1 to 600, in seconds.
tc_protection_threshold -		Set the maximum number of TC BPDUs that the MSTP can handle. The value is an integer ranging from 1 to 255. The default value is 1 on the switch.

Notes

Note

• Recommended connection is network_cli.
• This module also works with local connections for legacy playbooks.

Examples

- name: CloudEngine stp test
  hosts: cloudengine
  connection: local
  gather_facts: no
  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: "{{ ansible_ssh_port }}"
      username: "{{ username }}"
      password: "{{ password }}"
      transport: cli

  tasks:

  - name: "Config stp mode"
    ce_stp:
      state: present
      stp_mode: stp
      provider: "{{ cli }}"

  - name: "Undo stp mode"
    ce_stp:
      state: absent
      stp_mode: stp
      provider: "{{ cli }}"

  - name: "Enable bpdu protection"
    ce_stp:
      state: present
      bpdu_protection: enable
      provider: "{{ cli }}"

  - name: "Disable bpdu protection"
    ce_stp:
      state: present
      bpdu_protection: disable
      provider: "{{ cli }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
changed boolean	always	check to see if a change was made on the device Sample: True
end_state dictionary	always	k/v pairs of aaa params after module execution Sample: {'bpdu_protection': 'enable'}
existing dictionary	always	k/v pairs of existing aaa server Sample: {'bpdu_protection': 'disable'}
proposed dictionary	always	k/v pairs of parameters passed into module Sample: {'bpdu_protection': 'enable', 'state': 'present'}
updates list	always	command sent to the device Sample: ['stp bpdu-protection']

Status

• This module is not guaranteed to have a backwards compatible interface. [preview]
• This module is maintained by the Ansible Community. [community]

Authors

• wangdezhuang (@QijunPan)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.