nxos_interface – Manages physical attributes of interfaces¶

DEPRECATED
Synopsis
Parameters
Notes
Examples
Return Values
Status

DEPRECATED ¶

Removed in Ansible:
	version: 2.13
Why:	Updated modules released with more functionality
Alternative:	nxos_interfaces

Synopsis ¶

Manages physical attributes of interfaces of NX-OS switches.

Parameters ¶

Parameter		Choices/Defaults	Comments
admin_state -		Choices: up ← down	Administrative state of the interface.
aggregate - added in 2.5			List of Interfaces definitions.
delay -		Default: 10	Time in seconds to wait before checking for the operational state on remote device. This wait is applicable for operational state arguments.
description -			Interface description.
duplex - added in 2.5		Choices: full half auto ←	Interface link status. Applicable for ethernet interface only.
fabric_forwarding_anycast_gateway boolean		Choices: no yes	Associate SVI with anycast gateway under VLAN configuration mode. Applicable for SVI interface only.
interface_type -		Choices: loopback portchannel svi nve	Interface type to be unconfigured from the device.
ip_forward -		Choices: enable disable	Enable/Disable ip forward feature on SVIs.
mode -		Choices: layer2 layer3	Manage Layer 2 or Layer 3 state of the interface. This option is supported for ethernet and portchannel interface. Applicable for ethernet and portchannel interface only.
mtu - added in 2.5			MTU for a specific interface. Must be an even number between 576 and 9216. Applicable for ethernet interface only.
name - / required			Full name of interface, i.e. Ethernet1/1, port-channel10. aliases: interface
neighbors - added in 2.5			Check the operational state of given interface `name` for LLDP neighbor. The following suboptions are available. This is state check parameter only.
	host -		LLDP neighbor host for given interface `name`.
	port -		LLDP neighbor port to which given interface `name` is connected.
provider dictionary			Deprecated Starting with Ansible 2.5 we recommend using `connection: network_cli`. This option is only required if you are using NX-API. For more information please see the NXOS Platform Options guide. A dict object containing connection details.
	auth_pass string added in 2.5.3		Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTH_PASS` will be used instead.
	authorize boolean added in 2.5.3	Choices: no ← yes	Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTHORIZE` will be used instead.
	host string / required		Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
	password string		Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_PASSWORD` will be used instead.
	port integer	Default: "0 (use common port)"	Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).
	ssh_keyfile string		Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_SSH_KEYFILE` will be used instead.
	timeout integer	Default: 10	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).
	transport string / required	Choices: cli ← nxapi	Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.
	use_proxy boolean added in 2.5	Choices: no yes ←	If `no`, the environment variables `http_proxy` and `https_proxy` will be ignored.
	use_ssl boolean	Choices: no ← yes	Configures the transport to use SSL if set to `yes` only when the `transport=nxapi`, otherwise this value is ignored.
	username string		Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_USERNAME` will be used instead.
	validate_certs boolean	Choices: no yes ←	If `no`, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored.
rx_rate - added in 2.5			Receiver rate in bits per second (bps). This is state check parameter only. Supports conditionals, see Conditionals in Networking Modules
speed - added in 2.5			Interface link speed. Applicable for ethernet interface only.
state -		Choices: present ← absent default	Specify desired state of the resource.
tx_rate - added in 2.5			Transmit rate in bits per second (bps). This is state check parameter only. Supports conditionals, see Conditionals in Networking Modules

Notes ¶

Note

Tested against NXOSv 7.3.(0)D1(1) on VIRL
This module is also used to create logical interfaces such as svis and loopbacks.
Be cautious of platform specific idiosyncrasies. For example, when you default a loopback interface, the admin state toggles on certain versions of NX-OS.
The nxos_overlay_global anycast_gateway_mac attribute must be set before setting the fabric_forwarding_anycast_gateway property.
For information on using CLI and NX-API see the NXOS Platform Options guide
For more information on using Ansible to manage network devices see the Ansible Network Guide
For more information on using Ansible to manage Cisco devices see the Cisco integration page.

Examples ¶

- name: Ensure an interface is a Layer 3 port and that it has the proper description
  nxos_interface:
    name: Ethernet1/1
    description: 'Configured by Ansible'
    mode: layer3

- name: Admin down an interface
  nxos_interface:
    name: Ethernet2/1
    admin_state: down

- name: Remove all loopback interfaces
  nxos_interface:
    name: loopback
    state: absent

- name: Remove all logical interfaces
  nxos_interface:
    interface_type: "{{ item }} "
    state: absent
  loop:
    - loopback
    - portchannel
    - svi
    - nve

- name: Admin up all loopback interfaces
  nxos_interface:
    name: loopback 0-1023
    admin_state: up

- name: Admin down all loopback interfaces
  nxos_interface:
    name: loopback 0-1023
    admin_state: down

- name: Check neighbors intent arguments
  nxos_interface:
    name: Ethernet2/3
    neighbors:
    - port: Ethernet2/3
      host: abc.mycompany.com

- name: Add interface using aggregate
  nxos_interface:
    aggregate:
    - { name: Ethernet0/1, mtu: 256, description: test-interface-1 }
    - { name: Ethernet0/2, mtu: 516, description: test-interface-2 }
    duplex: full
    speed: 100
    state: present

- name: Delete interface using aggregate
  nxos_interface:
    aggregate:
    - name: Loopback9
    - name: Loopback10
    state: absent

- name: Check intent arguments
  nxos_interface:
    name: Ethernet0/2
    state: up
    tx_rate: ge(0)
    rx_rate: le(0)

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
commands list	always	command list sent to the device Sample: ['interface Ethernet2/3', 'mtu 1500', 'speed 10']

Status ¶

This module will be removed in version 2.13. [deprecated]
For more information see DEPRECATED.

Authors¶

Jason Edelman (@jedelman8)
Trishna Guha (@trishnaguha)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.

nxos_interface – Manages physical attributes of interfaces¶

DEPRECATED¶

Synopsis¶

Parameters¶

Notes¶

Examples¶

Return Values¶

Status¶

Authors¶

DEPRECATED ¶

Synopsis ¶

Parameters ¶

Notes ¶

Examples ¶

Return Values ¶

Status ¶