junos_interfaces – Manages interface attributes of Juniper Junos OS network devices

New in version 2.9.

Synopsis

  • This module manages the interfaces on Juniper Junos OS network devices.

Requirements

The below requirements are needed on the host that executes this module.

  • ncclient (>=v0.6.4)

Parameters

Parameter Choices/Defaults Comments
config
list
The provided configuration
description
string
Interface description.
duplex
string
    Choices:
  • automatic
  • full-duplex
  • half-duplex
Interface link status. Applicable for Ethernet interfaces only, either in half duplex, full duplex or in automatic state which negotiates the duplex automatically.
enabled
boolean
    Choices:
  • no
  • yes ←
Administrative state of the interface.
Set the value to true to administratively enabled the interface or false to disable it.
hold_time
dictionary
The hold time for given interface name.
down
integer
The link down hold time in milliseconds.
up
integer
The link up hold time in milliseconds.
mtu
integer
MTU for a specific interface.
Applicable for Ethernet interfaces only.
name
string / required
Full name of interface, e.g. ge-0/0/0.
speed
integer
Interface link speed. Applicable for Ethernet interfaces only.
state
string
    Choices:
  • merged ←
  • replaced
  • overridden
  • deleted
The state of the configuration after module completion

Notes

Note

  • This module requires the netconf system service be enabled on the remote device being managed.
  • Tested against vSRX JUNOS version 18.4R1.
  • This module works with connection netconf. See the Junos OS Platform Options.

Examples

# Using deleted

# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
#    description "Configured by Ansible-1";
#    speed 1g;
#    mtu 1800
# }
# ge-0/0/2 {
#    description "Configured by Ansible-2";
#    ether-options {
#        auto-negotiation;
#    }
# }

- name: "Delete given options for the interface (Note: This won't delete the interface itself if any other values are configured for interface)"
  junos_interfaces:
    config:
      - name: ge-0/0/1
        description: 'Configured by Ansible-1'
        speed: 1g
        mtu: 1800
      - name: ge-0/0/2
        description: 'Configured by Ansible -2'
    state: deleted

# After state:
# ------------
# user@junos01# show interfaces
# ge-0/0/2 {
#    ether-options {
#        auto-negotiation;
#    }
# }


# Using merged

# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
#    description "test interface";
#    speed 1g;
# }

- name: "Merge provided configuration with device configuration (default operation is merge)"
  junos_interfaces:
    config:
      - name: ge-0/0/1
        description: 'Configured by Ansible-1'
        enabled: True
        mtu: 1800
      - name: ge-0/0/2
        description: 'Configured by Ansible-2'
        enabled: False
    state: merged

# After state:
# ------------
# user@junos01# show interfaces
# ge-0/0/1 {
#    description "Configured by Ansible-1";
#    speed 1g;
#    mtu 1800
# }
# ge-0/0/2 {
#    disable;
#    description "Configured by Ansible-2";
# }


# Using overridden

# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
#    description "Configured by Ansible-1";
#    speed 1g;
#    mtu 1800
# }
# ge-0/0/2 {
#    disable;
#    description "Configured by Ansible-2";
#    ether-options {
#        auto-negotiation;
#    }
# }
# ge-0/0/11 {
#    description "Configured by Ansible-11";
# }

- name: "Override device configuration of all interfaces with provided configuration"
  junos_interfaces:
    config:
      - name: ge-0/0/2
        description: 'Configured by Ansible-2'
        enabled: False
        mtu: 2800
      - name: ge-0/0/3
        description: 'Configured by Ansible-3'
    state: overridden

# After state:
# ------------
# user@junos01# show interfaces
# ge-0/0/2 {
#    disable;
#    description "Configured by Ansible-2";
#    mtu 2800
# }
# ge-0/0/3 {
#    description "Configured by Ansible-3";
# }


# Using replaced

# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
#    description "Configured by Ansible-1";
#    speed 1g;
#    mtu 1800
# }
# ge-0/0/2 {
#    disable;
#    mtu 1800;
#    speed 1g;
#    description "Configured by Ansible-2";
#    ether-options {
#        auto-negotiation;
#    }
# }
# ge-0/0/11 {
#    description "Configured by Ansible-11";
# }

- name: "Replaces device configuration of listed interfaces with provided configuration"
  junos_interfaces:
    config:
      - name: ge-0/0/2
        description: 'Configured by Ansible-2'
        enabled: False
        mtu: 2800
      - name: ge-0/0/3
        description: 'Configured by Ansible-3'
    state: replaced

# After state:
# ------------
# user@junos01# show interfaces
# ge-0/0/1 {
#    description "Configured by Ansible-1";
#    speed 1g;
#    mtu 1800
# }
# ge-0/0/2 {
#    disable;
#    description "Configured by Ansible-2";
#    mtu 2800
# }
# ge-0/0/3 {
#    description "Configured by Ansible-3";
# }
# ge-0/0/11 {
#    description "Configured by Ansible-11";
# }

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
list
when changed
The configuration as structured data after module completion.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
list
always
The configuration as structured data prior to module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
xml
list
always
The set of xml rpc payload pushed to the remote device.

Sample:
['xml 1', 'xml 2', 'xml 3']


Status

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

  • Ganesh Nalawade (@ganeshrn)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.