bigip_device_auth – Manage system authentication on a BIG-IP¶

New in version 2.7.

Synopsis
Parameters
Notes
Examples
Return Values
Status

Synopsis ¶

Manage the system authentication configuration. This module can assist in configuring a number of different system authentication types. Note that this module can not be used to configure APM authentication types.

Parameters ¶

Parameter		Choices/Defaults	Comments
authentication string		Choices: use-first-server use-all-servers	Specifies the process the system employs when sending authentication requests. When `use-first-server`, specifies that the system sends authentication attempts to only the first server in the list. When `use-all-servers`, specifies that the system sends an authentication request to each server until authentication succeeds, or until the system has sent a request to all servers in the list. This parameter is supported by the `tacacs` type.
protocol_name string		Choices: lcp ip ipx atalk vines lat xremote tn3270 telnet rlogin pad vpdn ftp http deccp osicp unknown	Specifies the protocol associated with the value specified in `service_name`, which is a subset of the associated service being used for client authorization or system accounting. Note that the majority of TACACS+ implementations are of protocol type `ip`, so try that first.
provider dictionary added in 2.5			A dict object containing connection details.
	auth_provider string		Configures the auth provider for to obtain authentication tokens from the remote device. This option is really used when working with BIG-IQ devices.
	password string / required		The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable `F5_PASSWORD`. aliases: pass, pwd
	server string / required		The BIG-IP host. You may omit this option by setting the environment variable `F5_SERVER`.
	server_port integer	Default: 443	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`.
	ssh_keyfile path		Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports. You may omit this option by setting the environment variable `ANSIBLE_NET_SSH_KEYFILE`.
	timeout integer		Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	transport string	Choices: cli rest ←	Configures the transport connection to use when connecting to the remote device.
	user string / required		The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
	validate_certs boolean	Choices: no yes ←	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`.
secret string			Secret key used to encrypt and decrypt packets sent or received from the server. Do not use the pound/hash sign in the secret for TACACS+ servers. When configuring TACACS+ auth for the first time, this value is required.
servers raw			Specifies a list of the IPv4 addresses for servers using the Terminal Access Controller Access System (TACACS)+ protocol with which the system communicates to obtain authorization data. For each address, an alternate TCP port number may be optionally specified by specifying the `port` key. If no port number is specified, the default port `49163` is used. This parameter is supported by the `tacacs` type.
	address -		The IP address of the server. This field is required, unless you are specifying a simple list of servers. In that case, the simple list can specify server IPs. See examples for more clarification.
	port -	Default: 49163	The port of the server.
service_name string		Choices: slip ppp arap shell tty-daemon connection system firewall	Specifies the name of the service that the user is requesting to be authorized to use. Identifying what the user is asking to be authorized for, enables the TACACS+ server to behave differently for different types of authorization requests. When configuring this form of system authentication, this setting is required. Note that the majority of TACACS+ implementations are of service type `ppp`, so try that first.
state string		Choices: absent present ←	The state of the authentication configuration on the system. When `present`, guarantees that the system is configured for the specified `type`. When `absent`, sets the system auth source back to `local`.
type string		Choices: tacacs local	The authentication type to manage with this module. Take special note that the parameters supported by this module will vary depending on the `type` that you are configuring. This module only supports a subset, at this time, of the total available auth types.
update_secret string		Choices: always ← on_create	`always` will allow to update secrets if the user chooses to do so. `on_create` will only set the secret when a `use_auth_source` is `yes` and TACACS+ is not currently the auth source.
use_for_auth boolean		Choices: no yes	Specifies whether or not this auth source is put in use on the system.

Notes ¶

Note

For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
Requires BIG-IP software version >= 12.
The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples ¶

- name: Set the system auth to TACACS+, default server port
  bigip_device_auth:
    type: tacacs
    authentication: use-all-servers
    protocol_name: ip
    secret: secret
    servers:
      - 10.10.10.10
      - 10.10.10.11
    service_name: ppp
    state: present
    use_for_auth: yes
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Set the system auth to TACACS+, override server port
  bigip_device_auth:
    type: tacacs
    authentication: use-all-servers
    protocol_name: ip
    secret: secret
    servers:
      - address: 10.10.10.10
        port: 1234
      - 10.10.10.11
    service_name: ppp
    use_for_auth: yes
    state: present
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
authentication string	changed	Process the system uses to serve authentication requests when using TACACS. Sample: use-all-servers
protocol_name string	changed	Name of the protocol associated with `service_name` used for client authentication. Sample: ip
servers list	changed	List of servers used in TACACS authentication. Sample: ['1.2.2.1', '4.5.5.4']
service_name string	changed	Name of the service the user is requesting to be authorized to use. Sample: ppp

Status ¶

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by an Ansible Partner. [certified]

Authors¶

Tim Rupp (@caphrim007)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.

bigip_device_auth – Manage system authentication on a BIG-IP¶

Synopsis¶

Parameters¶

Notes¶

Examples¶

Return Values¶

Status¶